|
|
Figure 6
Figure 9
Remove the inner and outer brake disc.
Remove the brake housing adaptor plate place bolts, and
lower hole stud nuts and washers. (See page 8 for brake
adaptor update.)
Figure 10
Figure 7
Remove adaptor plate.
Remove the disc housing to adaptor plate bolts.
CLEANING AND INSPECTION
CLEANING
Clean all parts thoroughly using solvent type cleaning fluid.
It is recommended that parts be immersed in cleaning fluid
and moved up and down slowly until all old lubricant and
foreign material is dissolved and parts are thoroughly
cleaned.
CAUTION: Care should be exercised to avoid skin rashes,
fire hazards and inhalation of vapors when using solvent
type cleaners.
INSPECTION
The importance of careful and thorough inspection of all
parts cannot be overstressed. Replacement of all parts
Figure 8
Remove disc housing.
2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |