|
|
Figure 83
Install clutch driven gear inner bearing.
Figure 86
Install front bearing locating ring.
Figure 84
Install clutch driven gear into clutch drum. Align splines on
clutch gear with internal teeth of friction discs. Tap gear
into position. Do not force this operation. Gear splines must
Figure 87
be in full position with internal teeth of all friction discs.
Install front bearing. NOTE: Snap ring groove In front
bearing must be down.
Figure 85
Install driven gear outer bearing.
SEE FIG. N FOR PROPER
Figure 88
Install front bearing retaining ring.
SHIELDED BEARING INSTALLATION
16
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |