|
|
3208 INDUSTRIAL AND MARINE ENGINES
DISASSEMBLY AND ASSEMBLY
SEA WATER PUMP
2. Install seal in bearing housing with tooling (B)
with the lip of the seal toward the bearings.
Install new O-ring seal in housing.
3. Install impeller into housing with tool (A). Use a
hammer to push the impeller into the housing.
CAUTION: Be careful not to cut edges of the inlet and
outlet ports when installing.
4. Install wear plate (6) and a new gasket (5) on
bearing housing.
5. Install bearing housing (7) into impeller housing.
73
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |