|
|
3208 INDUSTRIAL AND MARINE ENGINES
DISASSEMBLY AND ASSEMBLY
SEA WATER PUMP
7. Turn bearing housing over and remove snap
ring (12) from shaft assembly (13) in housing.
8. Remove shaft assembly from housing. Remove
bearing (17), spacer (15), bearing (16) and seal
(14) from shaft.
9. Remove O-ring seal (18) from bearing housing.
Remove seal (19) from bearing housing with
tooling (A). Inspect O-ring seal.
ASSEMBLE SEA WATER PUMP 16-1371
Tools Needed
A
B
1Y7426
Ring Compressor
1
1P529
Handle
1
1P472
Drive Plate
1
1P464
Drive Plate
1
1. Install seal (1) on shaft with chamfer face
toward the bearings. Install bearing (2), spacer
(3) and bearing (4). Install shaft assembly into
housing and the snap ring that holds it in place.
72
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |