INSTALL OIL FILTER. BASE AND ENGINE OIL COOLER (INDUSTRIAL ENGINE)

3208 INDUSTRIAL AND MARINE ENGINES

DISASSEMBLY AND ASSEMBLY

OIL FILTER BASE AND ENGINE OIL COOLER

REMOVE OIL FILTER BASE AND ENGINE OIL

COOLER (INDUSTRIAL

ENGINE)

11-1306 & 1378

1. Remove the coolant from the cooling system.

2, Loosen clamps (1) and disconnect hoses (2)

from engine oil cooler (4). Remove oil filters

(5).

3. Remove two bolts (3) and two bolts from behind

the oil cooler.

4. Remove oil filter base and engine oil cooler as a

unit.

INSTALL OIL FILTER.BASE AND ENGINE

OIL COOLER (INDUSTRIAL

ENGINE)

12-1306& 1378

1. Inspect the O-ring seals in the oil filter base.

Install new seals if needed. Put oil on the seals.

2. Put oil filter base and oil cooler in position on

the engine. Install the four bolts that hold it in

place.

3. Install two oil filters. Connect two hoses.

4. Fill the cooling system to the correct level.

DISASSEMBLE OIL FILTER BASE AND

ENGINE OIL COOLER (INDUSTRIAL

ENGINE)

15-1306 & 1378

start by:

a) remove oil filter base and engine oil

cooler

1. Remove the bolts that hold cover (1) to base

(2). Remove the cover.

2. Remove the three nuts that hold core (3) to the

base. Remove the core.

3. Remove the cap and fitting (6), spring (5), and

valve

(4)

from

the

base.