ASSEMBLE OIL FILTER BASE AND ENGINE OIL COOLER (MARINE ENGINE)

3208 INDUSTRIAL AND MARINE ENGINES

DISASSEMBLY AND ASSEMBLY

OIL FILTER BASE AND ENGINE OIL COOLER

ASSEMBLE OIL FILTER BASE AND ENGINE

OIL COOLER (MARINE

ENGINE)

16-1306 & 1378

1. Install the valve, spring, cap and fitting (3) in

base (2).

2. Inspect the gasket that goes between the oil

filter base and the core. Install a new gasket if

needed.

NOTE: The gasket must be installed with point (5)

(indexing point) in the position shown.

3. Install the core in the base. Install nuts (1).

Tighten the nuts to a torque of 16 2 Ib.ft. (2.2

0.3 mkg).

4. Inspect the gasket that goes between the core

and cover (6). Install a new gasket if needed.

5. Put the cover in position on the base. Install

bolts (4).

end by:

a) install oil filter base and engine oil

cooler