|
|
3208 INDUSTRIAL AND MARINE ENGINES
DISASSEMBLY AND ASSEMBLY
EXHAUST MANIFOLDS
REMOVE EXHAUST MANIFOLD (MARINE
ENGINE)
11-1059
1. Disconnect inlet water line (1) and outlet line (3).
2. Remove the bolts (2) that hold the manifold in
place.
3. Fasten a hoist and remove the exhaust manifold
(4). Weight of the exhaust manifold is 80 lb. (36
kg).
INSTALL EXHAUST MANIFOLD (MARINE
ENGINE)
12-1059
1. Put gaskets and manifold in position on the
cylinder block.
2. Put 9M3710 Anti-Seize Compound on the bolt
threads and install them. Tighten the bolts to a
torque of 32 5 lb.ft. (4.4 0.7 mkg).
3. Connect the inlet and outlet water lines.
REMOVE EXHAUST MANIFOLD (INDUSTRIAL
ENGINE)
11-1059
1. Remove bolts (1) and remove exhaust manifold (2).
INSTALL EXHAUST MANIFOLD (INDUSTRIAL
ENGINE)
12-1059
1. Put gaskets and manifold in position on the
cylinder block.
2. Put 9M3710 Anti-Seize Compound on the bolt
threads and install them. Tighten the bolts to a
torque of 32 + 5 lb.ft. (4.4 0.7 mkg).
NOTE: Locks must be bent on a flat side of the bolt
head. Bolts must be turned no more than 300 of a turn
for the alignment of the locks with a flat side of the bolt
head.
37
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |