REMOVING COVER AND THRUST COLLAR

FUEL SYSTEM

TESTING AND ADJUSTMENT

10. Remove the cover (10) from the pump housing.

15. Remove the shield (19) from the camshaft with bar

(B).

CAUTION: Pull on the shield only a small amount in each

location, so it will not have distortion or damage. The

shield is staked in place and can be damaged when

removed. If the shield is damaged it must be replaced.

REMOVING COVER AND THRUST COLLAR

10. Cover. 11. Thrust collar.

11. Loosen the two bolts (12) that hold the torque spring

assembly (13) and remove it from the pump housing.

REMOVING SHIELD

19. Shield. B. 5P302 Bar.

REMOVING TORQUE SPRING

12. Bolts (two). 13. Torque spring assembly.

REMOVING BOLTS

12. Remove the pin (14) from the pump housing.

20. Bolts (three). C. 3P1544Timing Pin.

13. Remove the screw (15) and the nut (17) from the

16. Install the timing pin (C) to hold the camshaft.

pump housing.

17. Remove the bolts (20) that hold the flyweight

14. Remove the ring that holds the lever and remove the

assembly to the camshaft.

lever (18) from the dowel (16).

REMOVING FLYWEIGHT ASSEMBLY

(Typical Example)

REMOVING GOVERNOR PARTS

14. Pin. 15.Screw. 16.Dowel. 17.Nut. 18.Lever.

21. Flyweight assembly.