|
|
Water Pump-Fan Drive (Fig. A), and Air Compressor
High-Mount Fan Drive (Fig. B)
Drive (Fig. C & D);
1. Loosen the four bolts holding the adjustment plate.
1. Loosen the adjusting bolt and pivot bolt on the
2. Loosen the adjustment bolt locknut.
idler.
3. Turn the adjustment bolt to obtain correct bolt ad-
2. Move the idler outward until the belt is properly ad-
justment.
justed. Tighten the adjustment bolt.
4. Tighten the four bolts holding the adjustment plate.
3. Check the adjustment.
5. Tighten the adjustment bolt locknut.
4. Tighten the pivot bolt.
FIG. D AIR COMPRESSOR DRIVE WITH HIGH MOUNT
FAN DRIW
FIG C AIR COMPRESSOR DRIVE
SAFETY SHUT-OFF CONTROLS
The shut-off controls must be checked to Insure proper
authorized personnel should perform the checks.
functioning if and when needed. To prevent damage
Contact your Caterpillar dealer,
to your engine while making the required test, only
23
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |