Installation of Hose Section With Hose Splice, For All Hose Sizes 1 Inch or Longer.

TM 5-3835-222-BD

f. Tighten the clamps with a screwdriver.

g. Repeat Steps a-f for the other hose end.

8-20. Installation of Hose Section With Hose Splice, For All Hose Sizes 1 Inch or Longer.

Personnel/Tools Required:

1 soldier 10 minutes

Materials/Tools:

Tool Kit

Clamp(s)

Hose Splice Fitting

Procedural Steps:

a. Place one heavy-duty hose clamp onto the existing hose. Do not tighten.

b. Push the hose splice into the end of the existing hose.

c. Slide one heavy-duty hose clamp onto the replacement hose.

d. Push the hose splice Into the replacement hose section.

e. Slide the clamps so they cover the hose splice on either side.

8-39