Low-Pressure isolation By Bullet Insertion

TM 5-3835-222-BD

f. install the crimped tube on the vehicle.

g. Check that the hydraulic reservoir level is at least at the minimum operating level. If this level

is low, refer to para 8-13 and fill the reservoir as needed.

h. Operate ail hydraulic subsystems (except those that may still be damaged) to remove air from

the system. Check carefully for fluid leaks. Tighten leaking fittings.

i. Check the hydraulic reservoir again to ensure a sufficient hydraulic fluid level. If this level is

low, refer to para 8-13 and fill the reservoir as needed.

j. Record the BDAR action taken. When the mission is completed, as soon as practicable,

repair using standard maintenance procedures.

8-8.3. Low-Pressure isolation By Bullet Insertion

Limitations:

Correct size bullet must be used.

Personnel/Time Required:

1 soldier 1.0 hr.

Materials/Tools:

Tool Kit

Vise

Blunt Punch

Hacksaw

Deleted.

Change 1 8-23