|
|
TM 5-3835-222-BD
CHAPTER 8
HYDRAULIC
POWER
DISTRIBUTION
BDAR FIXES SHALL BE USED ONLY IN COMBAT OR FOR
TRAINING AT THE DISCRETION OF THE COMMANDER.
(AUTHORIZED TRAINING FIXES ARE LISTED IN APPENDIX E.)
IN EITHER CASE', DAMAGES SHALL BE REPAIRED BY
STANDARD MAINTENANCE PROCEDURES
AS SOON AS PRACTICABLE.
Section I. INTRODUCTION
8 - 1 . S c o p e . BDAR for a hydraulic system is generally confined to component replacement,
expedient line repairs, or bypassing damaged lines. If a hydraulic circuit cannot be repaired, it may
be necessary to isolate it (cut it off) from the system to permit operation of some other hydraulic
functions. Damage to the hydraulic system almost always requires replenishment of lost fluids.
Bring hydraulic system to zero pressure before making repairs.
If this pressure is not relieved before working on the
equipment, serious injury or death may occur.
8-2. Assessment Procedures:
No specific assessment procedure is needed to locate leaks and ruptured lines. System specific TMs
must be checked before any isolation is performed.
NOTE:
Procedures boxed in this index can be used for training purposes.
8-3.
Repair Procedure Index.
Paragraph
Cannibalization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hose Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hydraulic Hose Isolation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hydraulic Tube Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hydraulic Tube Isolation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
O-Ring Fabrication (From Rubber) .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hydraulic Reservoir-Repair (Using Bolt or Stick and Neoprene) . . . . . . . . . . .
8-1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |