Procedural Steps: - TM-5-3835-222-BD0030

TM 5-3835-222-BD

Procedural Steps:

Option 1:

a. Rope or wire can also be used, but thin wire must be braided to ensure the needed friction

is provided.

b. Assemble the rope or wire as close as possible to the original length of the correct belt.

c. Adjust with the tensioner assembly.

Option 2:

a. Separable-link belts can be used, if available.

b. Assemble the belting as close as possible to the original length of the correct belt and adjust

with a vehicle belt tensioner.

c. Install the belt as shown. This prevents undue strain on the belt links.

SIZE

NSN

U/I

3030-00-224-8358 . . . . . . . . . . . . FT

A SIZE

. . . . . . . . . . . . FT

B BELTING

Record the BDAR action taken. When the mission is completed, as soon as practicable, repair the

equipment using standard maintenance procedures.

3-6