Maintenance Code - TM-32-5811-024-14-P0200

Code

Definition

Item to be manufactured or fabricated at organizational level.

Item to be manufactured or fabricated at the direct support maintenance level.

Item to be manufactured or fabricated at the general support maintenance level.

Item to be manufactured or fabricated at the depot maintenance level.

Item to be assembled at organizational level.

Item to be assembled at direct support maintenance level.

Item to be assembled at general support maintenance level.

Item to be assembled at depot maintenance level.

Item is not procured or stocked because the requirements for the item will result in the replacement of the

higher assembly.

Item is not procured or stocked. If not available through salvage, requisition.

A support item that is not stocked.

When required,

item will be procured through normal supply

channels.

NOTE

Cannibalization or salvage may be used as a source of supply for any items source coded above

except those coded XA, XD, and aircraft support items as restricted by AR 700-42.

(2) Maintenance Code. Maintenance codes are assigned to indicate the levels of maintenance authorized to USE

and REPAIR support items. The maintenance codes are entered in the third and fourth positions of the Uniform SMR

Code format as follows:

(a) The maintenance code entered in the third position will indicate the lowest maintenance level authorized to

remove, replace, and use the support item. The maintenance code entered in the third position will indicate one of the

following levels of maintenance:

C-6