CHAPTER 1 INTRODUCTION - TM-32-5811-024-14-P0013

TM 32-5811-024-14&P

CHAPTER 1

INTRODUCTION

Section I. GENERAL

1-1. Scope.

This manual provides organizational and intermediate support maintenance information for Digital Processor Test

Set AN/USM-433, herein-after referred to as the digital processor test set (see figure 1-1). In addition, the manual

provides general descriptions and data, operating instructions, and theory of operation.

1-2. Maintenance Forms and Records.

Department of the Army forms and procedures used for equipment maintenance will be those prescribed by TM 38-

750, The Army Maintenance Management System (TAMMS).

1-3. Destruction of Army Materiel To Prevent Enemy Use.

Procedures for the destruction of Army materiel are contained in TM 750-244-2, Procedures for Destruction of

Electronics Materiel to Prevent Enemy Use (Electronics Command).

1-4. Administrative Storage.

Refer to TM 740-90-1, Administrative Storage of Equipment, for test procedures, forms and records, and inspections

required during administrative storage of this equipment.

1-5. Reporting of Errors.

The reporting of errors, omissions, and recommendations for improving this publication by the individual user is

encouraged. Reports should be submitted on DA Form 2028 (Recommended Changes to Publications) and forwarded

directly to the Commander, U.S. Army Electronic Materiel Readiness Activity, Vint Hill Farms Station, Warrenton VA

22186, Attn: SELEM-ME-E.

1-6. Reporting Equipment Improvement Recommendations (EIR).

EIRs will be submitted on SF 368 (Quality Deficiency Report) in accordance with 38-750 (TAMMS). EIRs should be

mailed directly to the

1-1