 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 3-4240-302-30&P-3
2-7. PROTIECTIVE ENTRANCE CONTROL MODULE (CONT).
LOCATION
ITEM
ACTION
REMOVAL
Panel
Dome light DS2
1. Disassemble PECM (p. 2-33).
2. Remove two screws (1) from toggle switch (2)
and release wires (3).
3. Remove three screws (4), nonmetallic washers
(5), and nuts (6).
4. Remove one screw (7), washers (8 and 9), nuts
(10 and 11), and wire (12). Tag wire.
5. Remove dome light DS2 (13) and gasket (14).
REPAIR
Gasket
Replace torn or broken gasket. Fabricate
replacement gasket (FIG. D-1, app D).
INSTALLATION
Dome light DS2
1. Crimp terminals (3) on dome light wires.
2. Install gasket (14) and dome light DS2 (13) in
panel (15) using three screws (4), washers (5),
and nuts (6).
3. Install wire lead (12) on one screw (7) and
secure with washers (8 and 9) and nuts (10 and
11). Install wire leads (3) on toggle switch (2)
using two screws (1). Refer to wiring diagram
4. Reassemble PECM (p. 2-33).
2-38
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals