Figure 2-2. Igniter and fuzee positioning.

TM 3-1375-201-10

f. Cut the tape and remove the foam spacer from

lock ring (force in place as required).

h. (See figure 2-3.) Place the screen cover (f

the folded screen cover. Flatten the screen cover.

Check fit of screen cover to the drum. Place the screen

above) on top of the outer drum cover. Fasten the

cover nearby.

screen cover to the lever lock ring by passing the wire of

g. Place the outer drum cover on top of the metal

the wire lead seal (d above) through the screen cover,

outer drum. Check that gasket is properly positioned.

through the hole in the lever lock ring handle, the lever

Secure the outer drum cover to the drum with the lever

catch, and through the lead seal. Crimp the lead seal

after

draw

2-3