Cable Assembly 2J1.

TM 3-1040-279-12&P

i. Cable Assembly 2J1.

REMOVAL

1. Remove electrical connections from terminal block (1).

2. Remove two screws (2) and washers (3) and remove two loop clamps (4).

3. Remove four screws (5), washers (6), and nuts (7) and remove cable assembly (8) from frame

assembly (9).

NOTE

Air compressor and relay removed for clarity.

INSTALLATION

1. Position cable assembly (8) on frame assembly (9) and secure with four screws (5), washers (6),

and nuts (7).

2. Secure cable assembly (8) to frame assembly (9) with two loop clamps (4), screws (2) and

washers (3).

3. Attach electrical connections to terminal board (1), see air compressor assembly wiring (P. 4-166),

Coat terminal board screw threads with sealing compound (Item 11A, App E) before securing

connections.

Change 2

4-161