Air Compressor.

TM 3-1040-279-12&P

4-36 AIR COMPRESSOR ASSEMBLY (CONT).

b. Air Compressor.

REMOVAL

1. Remove electrical connections (1) from POS and NEG terminals on air compressor (2).

2. Remove motor cover screw (3) securing capacitor assembly (4) and loop clamp (5) to air

compressor (2).

3. Disconnect air hose assembly (6) from check valve (7), remove check valve (7) from elbow (8)

and remove elbow (8) from air compressor (2).

4. Remove two screws (9), washers (10) and nuts (11), and remove two loop clamps (12).

5. Remove air compressor (2) from frame assembly (13).

INSTALLATION

1. Position air compressor (2) on frame assembly (13) and secure with two loop clamps (12), two

screws (9), washers (10) and nuts (11).

2. Install elbow (8), check valve (7), and air hose assembly (6) on air compressor (2).

3. Install capacitor assembly (4) and loop clamp (5) on air compressor with motor cover screw (3).

4. Install electrical connections (1) on POS and NEG terminals of air compressor (2).