Terminal Bracket Assembly.

TM 3-1040-279-12&P

4-16 EQUIPMENT CONTAINER ASSEMBLY (CONT).

c. Terminal Bracket Assembly.

REMOVAL

1. Remove equipment container (P. 4-68).

2. Remove eight screws (1) and washers (2) and remove equipment container panel (3).

3. Remove four screws (5), flat washers (6) and lock washers (7), securing terminal bracket assembly

(8), and remove bracket assembly.

4. Tag and remove all wire leads from terminal board (4). See smoke generator wiring (P. 4-34).

INSTALLATION

1. Attach all wire leads to terminal board (4), smoke generator wiring (P. 4-34). Coat terminal board

screw thread with sealing compound before securing wire leads.

2. Position terminal bracket assembly (8), and secure with four screws (5), flat washers (6) and lock

washers (7).

3. Position equipment container panel (3) on equipment container (9) and secure with eight screws

(l), and flat washers (2).

4. Install equipment container (P. 4-68).