Stopping - TM-3-1040-279-12-P0045

TM 3-1040-279-12&P

NOTE

Proper fog oil flow must be delivered to generator within 5 seconds after

starting to ensure that high temperature thermal switch does not shut down

pulse jet engine.

c. Stopping. To shut down smoke generator, proceed as follows:

(1) Turn FOG OIL FLOW control knob fully clockwise to increase fog oil flow. Wait 3 seconds

(approximately 500F on SMOKE TEMP indicator).

(2) Set FOG OIL switch to OFF and allow excess fog oil to burn off.

(3) Set ENGINE switch to OFF.

(4) Follow steps 2-9b (4 through 8) for stopping under usual conditions (P. 2-12).

Change 4

2-15/(2-16 Blank)