REMOVE/REPLACE CONVERTER LINE/TERMINAL CONNECTOR PANEL

TM 11-7010-207-23

4-13. REMOVE/REPLACE CONVERTER LINE/TERMINAL CONNECTOR PANEL

INITIAL SETUP

Common Tools

Tool kit

NOTE

The 600GR converter is a rack-mounted

device. See your system manual for

removal instructions.

Remove

NOTE

There are two types of connector

panels used. For standard connector

panel use steps 1 thru 5, for fused

power panel use steps 1 thru 6.

1. Power off.

2. Locate defective connector panel to

be removed.

3. Remove converter board connected to

defective connector panel (para

4-12, Remove, steps 1 and 2).

4. At rear of unit loosen and remove

two cross recessed mounting screws

which secure panel to mounting rack.

4-15