APPENDIX C MAINTENANCE ALLOCATION - TM-11-6625-922-150051

TM 11-6625-922-15

APPENDIX C

MAINTENANCE ALLOCATION

Section I. INTRODUCTION

C-1. General

Code

Maintenance category

This appendix provides a summary of the maintenance

Operator/Crew

operations covered in the equipment literature for

Organizational Maintenance

Measuring Set, Envelope Delay Distortion TS-

Direct Support Maintenance

2669/GCM. It authorizes categories of maintenance for

General Support Maintenance

specific maintenance functions on repairable items and

Depot Maintenance

components and the tools and equipment required to

d. Tools and Equipment. The numbers appearing

perform each function. This appendix may be used as

in this column refer to specific tools and equipment

an aid in planning maintenance operations.

which are identified by these numbers in section III.

e. Remarks. Self explanatory.

C-2.

Explanation of Format for Maintenance

Allocation Chart

C-3.

Explanation of Format for Tool and Test

a. Group Number. Group numbers correspond to

Equipment Requirements

the reference designation prefix assigned in accordance

The columns in the tool and test equipment

with ASA Y32.16, Electrical and Electronics Reference

requirements chart are as follows:

Designations. They indicate the relation of listed items

a. Tools and Equipment. The numbers in this

to the next higher assembly.

column coincide with the numbers used in the tool and

b. Component Assembly Nomenclature.

This

equipment column of the MAC. The numbers indicate

column lists the item names of component units,

the applicable tool for the maintenance function.

assemblies, subassemblies, and modules on which

b. Maintenance Category.

The codes in this

maintenance is authorized.

column indicate the maintenance category normally

Maintenance Function. This column

allocated the facility.

indicates the maintenance category at which

c. Nomenclature. This column lists tools, test, and

performance of the specific maintenance function is

maintenance equipment required to perform the

authorized. Authorization to perform a function at any

maintenance functions.

category also includes authorization to perform that

d. Federal Stock Number. This column lists the

function at higher categories. The codes used represent

Federal stock number.

the various maintenance categories as follows:

e. Tool Number. Not used.

C-1