Special Information - TM-11-6625-3030-24P0004

TM 11-6625-3030-24P

all authorized maintenance functions). This position will

contain one of the following maintenance codes:

measure differs from the unit of issue, the lowest unit of

issue that will satisfy the required units of measure will be

Code

Application/Explanation

requisitioned.

h. Quantity Incorporated in Unit. Indicates the

H-The lowest maintenance level capable of complete

quantity of the item used in the breakout shown on

repair of the support item is the general support

the illustration figure, which is prepared for a functional

level.

group, subfunctional group, or an assembly.

Z-Nonreparable. No repair is authorized.

(3) Recoverability code. Recoverability codes are

assigned to support items to indicate the disposition

4. Special Information

action on unserviceable items. The recoverability code is

entered in the fifth position of the Uniform SMR Code

National stock numbers (NSN's) that are missing from P

format as follows:

source coded items have been applied for and will be

added to this TM by future change/revision when they are

Recoverability

entered in the Army Master Data File (AMDF). Until the

codes

Definition

NSN's are established and published, submit exception

Z-Nonreparable item. When unserviceable, condemn

requisitions to: Commander, US Army Communications-

and dispose at the level indicated in position 3.

Electronics Command and Fort Monmouth, ATTN:

H--Reparable item. When uneconomically reparable,

DRSEL-MM, Fort Monmouth, NJ 07703 for the part

condemn and dispose at the general support level.

required to support your equipment.

c. National Stock Number. Indicates the National

stock number assigned to the item and will be used for

5. How to Locate Repair Parts

requisitioning purposes.

d. Federal Supply Code for Manufacturer

a. When National stock number or part number is

(FSCM). The FSCM is a 5digit numeric code listed in SB

unknown.

708-41/42 which is used to identify the manufacturer,

(1) First. Using the table of contents, determine

distributor, or Government agency, etc.

the functional group within which the item belongs. This

e. Part Number. Indicates the primary number

is necessary since illustrations are prepared for

used by the manufacturer (individual, company, firm,

functional groups and listings are divided into the same

corporation, or Government activity), which controls the

groups.

design and characteristics of the item by means of its

(2) Second. Find the illustration covering the

engineering drawings, specifications, standards, and

functional group to which the item belongs.

inspection requirements to identify an item or range of

(3) Third Identify the item on the illustration and

items.

note the illustration figure and item number of the item.

(4) Fourth. Using the Repair Parts Listing, find

NOTE

the figure and item number noted on the illustration.

b. When National stock number or part number is

When a stock numbered item is requisitioned, the repair

known.

part received may have a different part number than the

(1) First. Using the Index of National Stock

part being replaced.

Numbers and Part Numbers, find the pertinent National

stock number or part number. This index is in NIIN

f. Description. Indicates the Federal item name

sequence followed by a list of part numbers in

and, if required, a minimum description to identify the

alphanumeric sequence, cross-referenced to the

item.

illustration figure number and item number.

g. Unit of Measure (U/IM). Indicates the standard

(2) Second After finding the figure and item

of the basic quantity of the listed item as used in

number, locate the figure and item number in the repair

performing the actual maintenance function.

This

parts list.

measure is expressed by a two-character alphabetical

abbreviation (e.g., ea., in, pr, etc.). When the unit of

6. Abbreviations

Not applicable.

(Next Printed page is 4)