SECTION I INTRODUCTION - TM-11-6625-273-20P0002

SECTION I

INTRODUCTION

1-1. Scope

Code

Explanation

This manual lists repair parts and special tools re-

PE -- Support equipment procured and stocked for

quired for the performance of organizational main-

initial issue or outfitting to specified main-

tenance of the AN/GSM-6 and AN/GSM-6A. The

tenance repair activities.

PCCN for the equipment is GTEAAU for all models.

PF Support equipment which will not be stocked

but which will be centrally procured on de-

1-2. General

mand.

This repair parts and special tools list is divided

PG Item procured and stocked to provide for sus-

into the following sections:

tained support for the life of the equipment.

a. Prescribed Load Allowance (PLA)--Section II.

It is applied to an item peculiar to the equip-

Not applicable.

ment which because of probable discon-

b. Repair Parts List--Section III. A list of repair

tinuance or shutdown of production facili-

parts authorized for the performance of mainte-

ties would prove uneconomical to reproduce

nance at the organizational level. This repair parts

at a later time.

list is arranged in alphabetical order.

KD An item of depot overhaul/repair kit and not

c. Special Tools, Test and Support Equipment --

purchased separately. Depot kit defined as

Section IV Not applicable.

a kit that provides items required at the

d. Index--Federal Stock Number and Reference

time of overhaul or repair.

Number Cross-Reference to Figure and Item Num -

KF An item of a maintenance kit and not pur-

ber--Section V. A list, in ascending numerical se-

chased separately. Maintenance kit defined

quence, of all Federal stock numbers appearing in

as a kit that provides an item that can be re-

the listings, followed by a list, in alphameric se-

placed at organizational or direct support

quence, of all reference numbers appearing in the

or general support levels of maintenance.

listing, Federal stock number and reference num-

KB Item included in both a depot overhaul/repair

bers are cross-referenced to each illustration figure

kit and a maintenance kit.

and item number or reference designation appear-

MO -- Item to be manufactured or fabricated at or-

ance.

ganizational level.

1-3. Explanation of Columns

MF Item to be manufactured or fabricated at di-

The following provides an explanation of columns

rect support maintenance level.

in the tabular lists--

MH Item to be manufactured or fabricated at gen-

a. Source. Maintenance, and Recoverability Codes

eral support maintenance level.

MD Item to be manufactured or fabricated at de-

(SMR).

(1) Source code. Indicates the manner of acquir-

pot maintenance level.

ing support items for maintenance, repair, or over-

AO Item to be assembled at organizational level.

haul of end items. Source codes are

AF Item to be assembled at direct support main-

tenance level.

Code

Explanation

AH -- Item to be assembled at general support main-

PA - Item procured and stocked for anticipated or

tenance level.

known usage.

AD Item to be assembled at depot maintenance

PB -- Item procured and stocked for insurance pur-

level.

poses because essentiality dictates that a

XA Item is not procured or stocked because the

minimum quantity be available in the sup-

requirements for the item will result in the

ply systems.

replacement of the next higher assembly.

PC -- Item procured and stocked and which other-

XB -- Item is not procured or stocked. If not avail

wise would be coded PA except that it is

able through salvage, requisition.

deteriorative in nature.

XC -- Installation drawing, diagram instruction

PD Support item, excluding support equipment,

sheet, field service drawing that is identi-

procured for initial issue or outfitting and

fied by manufacturers' part number.

stocked only for subsequent or additional

XD Support items can be requisitioned with jus-

initial issues or outfitting. Not subject

tification.

to automatic replenishment.