CONNECTOR UG-1870A/U REPLACEMENT (CONT) - TM-11-5995-208-24-P-10052

TM 11-5995-208-24&P-1

CONNECTOR UG-1870A/U REPLACEMENT (CONT)

20. Insert male center contact (1) into outer contact marked A (2).

21. Install braid retaining nut (3) into male center contact (1).

Braid retaining nut (3) should bottom on rear of contact when torqued.

22. Using a torque wrench, torque braid retaining nut (3) to 15-20 inch-pounds.

NOTE

Be sure that red O-ring is installed on outer contact (4) of front body assembly (5) before

installing female contact (6) into outer contact.

23. Install

female center contact (6) into outer contact marked B

(4).

24. Thread braid retaining nut (7) into female center contact (6).

NOTE

Braid retaining nut (7) should bottom on rear of contact when torqued.

Using a torque wrench, torque braid retaining nut (7) to 15-20 inch-pounds.

3-26