CONNECTOR UG-1870A/U REPLACEMENT (CONT) - TM-11-5995-208-24-P-10041

TM 11-5995-208-24&P-1

CONNECTOR UG-1870A/U REPLACEMENT (CONT)

NOTE

Be sure angled portion of large ring (7) faces front end of connector shell assembly (8)

when installing.

40. Install large ring (7) of cap shell assembly on connector shell assembly (8).

41. Insert nyloc screws (9) in rear insert (10).

NOTE

When installing rear insert (10), make sure male body assembly is inserted in

connector shell (8) insert hole that has larger opening in face seal. Make sure also that

both coaxial contacts are through face seal, and rear insert (10) butts against

connector shell (8) insert.

42. Install rear insert (10) into rear of connector shell assembly (8).

43. Using a 3/32-inch internal socket wrench, tighten two nyloc screws (9) until they

are seated.

44. Using a torque wrench, torque each nyloc screw (9) to 3-5 inch-pounds.

3-15