OUTER PLASTIC JACKET REPAIR (CONT) - TM-11-5995-208-24-P-10026

TM 11-5995-208-24&P-1

OUTER PLASTIC JACKET REPAIR (CONT)

6. Remove flourigiass fabric tape.

CAUTION

Use care when applying soldering iron to exposed cable.

NOTE

Applying a soldering iron to exposed cable brings the shine back to finished area, as well

as evens it out.

7. Using rapid movements, apply a soldering iron (1) to finished area (2).

Section VI PREPARATION FOR STORAGE OR SHIPMENT

Storage of the twin coaxial cable assembly for any period of time requires careful planning. The

storage area should be protected from the elements and drastic changes in temperature and humidity.

Before storing the cables on the reels, do all of the routine checks and services listed on page 2-4 and

all of the items in the PMCS chart on pages 2-5 and 2-6.

WARNING

When stacking reels of cable, do not stack them too high. Stack them so that any member

of the crew, tall or short, can safely handle the reels. Reels stacked too high or carelessly

are a serious safety hazard.

NOTE

Never assume that the cables cannot become damaged while they are in storage.

After removing the cables from storage, do all of the items in the PMCS chart.

2-12