Row 2 Equipment Bays

TM11-5895-932-14&P

blocks (fig. 1-13). The main signal cable from the

e. Test Buy 1.8 (fig. 1-9). Test bay equipment

signal line filter panel (in the ceiling) is connected

consists of four items of test equipment, two in-

to the terminating blocks.

terbay (INT BAY) patch panels, one miscellaneous

g. Miscellaneous Equipment Bay 1.10 (fig.

(MISC) panel, and a pullout shelf. Each INT BAY

1-14). Bay 1.10 is designated the miscellaneous

patch panel provides connections to another bay

equipment bay. It contains the audible alarm, the

(through its INT BAY patch) (dc to dc, vf to vf).

black alarm panel, intercom, 48-vdc power supply,

The MISC patch panel provides external patching

and two high-level dc patch panels. All wiring

to all test equipment. Teat equipment power input

connections (signal and power) are made on the

connections are made at the cabinet rear, along

rear of the components (figs. 1-16 and 1-16).

with the signal and cable connectors (fig. 1-10).

f. VF Frame & Patch Bay 1.9 (fig. 1 -11). Bay

1-10. Row 2 Equipment Bays

1.9 contains a dual speaker panel, four two-wire vf

The Row 2 equipment bays (fig. 1-17) are located

patch modules, and INT BAY patch module (vf),

in the Crypto Vault area and includes two red

and cable terminal blocks located on the bottom of

patch bays (secure and unsecure), one red IDF

the rack (fig. 1-12). Each 2W jack panel has the

bay, and two isolator bays (red and black). A

capability for 24 two-wire normal through circuits.

configuration of Equipment bays is shown in figure

Connections are made through connectors on the

1-18.

rear of the patching modules to the cable terminal

1-15