|
|
TM-11-5895-841-40P/NAVELEX
0967-LP-468-4050/TO31S5-2FYA10-374
INTRODUCTION
NOTE
1. Scope
Cannibalization or salvage may be used as
This manual lists repair parts required for per-
a source of supply for any items source
formance of general support maintenance of the
coded above except those coded XA, XD,
OJ-346/FYA-10(V).
and aircraft support items as restricted by
2. General
AR 700-42.
This repair parts and special tools list is divided
(2) Maintenance code. Maintenance codes are
into the following sections:
assigned to indicate the levels of maintenance
a. Section II.
Repair Parts List. A list of
authorized to USE and REPAIR support items.
repair parts authorized for use in the performance
The maintenance codes are entered in the third and
of maintenance. The list also includes parts which
fourth positions of the uniform SMR Code format
must be removed for replacement of the authorized
as follows:
parts. Parts lists are composed of functional
(a) The maintenance code entered in the
groups in ascending numerical sequence, with the
third position will indicate the lowest maintenance
parts in each group listed in figure and item
level authorized to remove, replace, and use the
number sequence.
support item. The maintenance code entered in the
Special Tools List. Not ap-
b. Section III.
third position will indicate the follo
plicable.
maintenance:
c. Section IV. National Stock Number and
Fart Number Index. A list, in ascending numerical
sequence, of all National stock numbers appearing
in the listings, followed by a list, in alphanumeric
sequence, of all part numbers appearing in the
fourth position indicates whether t
listings. National stock number and part numbers
are cross-referenced to each illustration figure and
with the capability to
item number appearance.
all authorized mai
position will contain
3. Explanation of Columns
tenance codes:
The following provides an explanation of columns
Code
Application/Explanation
found in the tabular listings:
H-The lowest maintenance level
a. Illustration. This column is divided as
follows:
(1) Figure number. Indicates the figure
number of the illustration in which the item is
shown.
number. The number used to
tem called out in the illustration.
Maintenance, and Recoverability
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |