|
|
TM 11-5895-833-12/NAVELEX 0967-LP-550-1010/TO 31R5-2TSC54-91
CHAPTER 2
SERVICE UPON RECEIPT AND INSTALLATION
2-1.Packaging Data
listed on the packing slip. If a packing slip is not
a. When prepared for shipment, the components and
available, check the equipment against the table of
accessories of the frequency conversion subsystem are
components. Report all discrepancies in accordance with
usually packed in one to seven plywood sheathed crates.
TM 38-750.The equipment should be placed in service
The total number of crates depends on the quantity of
even though a minor assembly or part that does not
up-converters,
down-converters,
and
frequency
affect proper functioning is missing.
synthesizers supplied for a specific subsystem
c. If the equipment has been used or reconditioned,
configuration. Dimensions, weight, volume, and contents
check to see whether the equipment has been changed
of the packed containers are given in tables 2-1, 2-2,
by a modification work order (MWO). Equipment which
and 2-3.Typical packaging arrangements are shown in
has been modified has the MWO number on the front
panel, near the nomenclature plate. Check also to see
whether the MWO number (if any) and the appropriate
2-2.Checking Unpacked Equipment
notations concerning the modification have been entered
a. Inspect the equipment for damage that may have
in the equipment manual.
been incurred during shipment. Report damages in
NOTE
accordance with paragraph 1-3.
Current MWO's applicable to the equipment are
b.Check to see that the equipment is complete as
listed in DA Pam 310-7.
Table 2-1. Dash One(-I)Configuration
Container
Dimensions
Volume
Weight
number
(in)
(cu ft)
(lb)
Contents
1
34 x 34 x 80
53.5
500
Up-converter cabinet
2
34 x 34 x 80
53.5
410
Down-converter cabinet
3
39 x 33 x 29
21.0
230
Up-converters (maximum 2)
4
96 x 40 x 17
37.8
350
Down-converters (maximum 3)
5
94 x 31 x 21
35.35
385
Frequency synthesizers (maximum 3)
6
60 x 31 x 21
12.4
260
Frequency synthesizers (maximum 2)
7
22 x 27 x 11
12.0
78
Group delay equalizers (2 each)
signal
combiner and signal divider (1 each)
NOTE
Item 7 is normally packed in a carton, padded and placed within item 1.
Table 2-2. Dash Two(-2)Configuration
Container
Dimensions
Volume
Weight
number
(in)
(cu ft)
(lb)
Contents
1
34 x 34 x 80
53.5
500
Upconverter cabinet
2
34 x 34 x 80
53.5
410
Down-converter cabinet
3
39 x 33 x 47
37.8
375
Up-converters (maximum 3)
4
96 x 40 x 17
37.8
350
Down-converters (maximum 3)
5
94 x 31 x 21
35.35
385
Frequency synthesizers (maximum 3)
6
94 x 31 x 21
35.35
385
Frequency synthesizers (maximum 3)
7
22 x 27 x 11
12.0
78
Group delay equalizers (2 each)signal
signal combiner and signal divider
(1 each)
NOTE
Item 7 is normally packed in a carton, padded and placed within item 1.
2-1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |