 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 11-5895-1179-13 EE132-EA-OMP-010/E106 KY883 TO 31S1-2GSC-161
2-10.
Mode C (Antenna Outage Mode)
When you are operating in a satellite communications link where antenna switching is possible, set the controls on your
encoder- decoder as shown in table 2-10. If your encoder-decoder is located at the transmit end of the communications
link, the ENCODER MODE select switch should be set to the C position. If your encoder-decoder is located at the receive
end of the communications link, the DECODER MODE select switch should be set to the C position. If you are
transmitting and receiving information, both the ENCODER MODE select switch and the DECODER MODE select switch
should be set to the C position. For proper operation, the encoder-decoder at the transmit end of the communications link
must have the ENCODER MODE Select switch set to the C position and the encoder-decoder at the receive end of the
communications link must have the DECODER MODE select switch set to the C position.
Table 2-10. Mode C Switch Settings
Required
Switch
Setting
Indicator
Indication
FUNCTION select
ON LINE
ENCODER MODE
C
select
DECODER MODE
C
select
ON/OFF
ON
POWER
On
ON LINE FAULT
Off*
INDICATORS (all)
SYNC
On
CHANNEL (x103)
On
-5)
Off
OUTPUT (x10
SEARCH
Off
ERROR RATE
Channel Error
COUNTER
Rate
*If any of these indicators is on, inform the next higher level of maintenance.
2-21/(2-22 blank)
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals