 |
|||
|
|
|||
|
Page Title:
Table 2-1. Controls and Indicators |
|
||
| ||||||||||
|
|
 TM 11-5895-1179-13 * EE132-EA-OMP-010/E106 KY883 * TO 31S1-2GSC-161
Table 2-1. Controls and Indicators
Item
No.
Control/Indicator
Function
1
ON/OFF switch
Turns the encoder-decoder ON and OFF.
2
POWER indicator
Tells you if the encoder-decoder is
on or off. If the POWER indicator is off, the encoder-decoder is off.
3
FUNCTION select
Selects the function you want the
switch
encoder-decoder to perform.
ON LINE
Put the FUNCTION select switch in
the ON LINE position for normal
operation.
LINK TEST
Put the FUNCTION select switch in
the LINK TEST position when you
want to run the link test
SELF TEST
Put the FUNCTION select switch in
the SELF TEST position when you
want to run the off-line self-test
4
ENCODER MODE
Selects the mode of operation in which you want the encoder to
select switch
operate.
A
Put the ENCODER MODE select switch in the A position (rate 1/2) when you
are operating in a satellite communications link with no with no threat of
pulse
jamming or antenna outage. This is
the normal mode of operation. i
B
Put the ENCODER MODE select switch the B position (rate 1/4)
when you are operating in a satellite communications link
that is being pulse jammed
C
Put the ENCODER MODE select switch in the C position (rate 1/4)
when you are operating in a satellite communications link
where antenna possible.
5
DECODER MODE
Selects the mode of operation in which you want the decoder
select switch
to operate
A
Put the DECODER MODE select switch in the A position when you
are operating in a satellite
communications link with no threat of pulse jamming or antenna
outage This is the normal mode
of operation
2-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals