Figure 6-3. Power Supply

T.O. 31W2-2GSC24-2

TM 11-5805-688-14-1

NAVELEX 0967-LP-545-3011

Figure 6-3. Power Supply - Top View

slides, return it to its normally installed position and

when source power is applied

secure chassis to its mounting rack.

through the power cable to the

multiplexer set.

6-24. FRONT PANEL ASSEMBLY. Replace the front

panel assembly (figure 6-2) as follows:

1. Disconnect power cable from POWER INPUT

connector on rear of multiplexer set.

WARNING

Hazardous voltages are present

2. Loosen and remove 14 screws and washers

within the front panel. The 115-volt

securing front panel to multiplexer set chassis.

ac is always applied to the POWER

CONTROL switch on the front panel

6-24