Table 6-3. Signal Name and Test Point List (Cont)

T.O. 31W2-2GSC24-2

TM 11-5805-688-14-1

NAVELEX 0967-LP-545-3010

Signal Name

Function

Test Point

+5A2

+5 volts (phase locked loop)

+5R

+5 volts thru resistor

_ _ _ 5, 19

+5V1

+5 volts

M17-14

+5V2

+5 volts

M17-14

+5V3

+5 volts

M17-14

1Test point location data are listed as follows:

2Signal appears at TP1 on RCB card, at TP16 on VE card, and at TP6 on TE/TR card.

3Signal appears at TP12 on TE/TR card and at TP8 on TD card.

4Signal appears at TP12 on RCB and VE cards.

5Input signal after buffering, level shifting, or inversion.

6Signal appears at TP13 on GC/DM card in multiplexer.

7Output signal before buffering, level shifting, or inversion.

8Signal appears at TP16 on RCB card and at TP11 on TE/TR card.

9Signal appears at TP2 on SB, NBSB, and TD cards, and at TP1 on VD card.

10Signal appears at TP1 on SB, NBSB, and TD cards.

11Signal appears at TP15 on RCB card, at TP13 on VE card, at TP9 on TE/TR card, at TP14 on VD card, at TP16 on SB and NBSB

cards, and at TP13 on TD card.

12Signal appears at TP15 on SB card and at TP6 on TD card.

13Signal appears at TP4 on RCB card.

14Signal appears at TP6 on SB and NBSB cards.

15Signal appears at TP5 on SB and NBSB cards.

16Signal appears at TP13 on TE/TR card and at TP8 on OEG card.

17Signal appears at TP9 on GC/DM card in demultiplexer.

18Signal M24EOS2 appears at TP1 and signal D24EOS2 appears at TP2 on display card.

19Signal appears at TP9 on GC/DM card in multiplexer.

Change 2 6-17