Table 2-1. Installation Data

T.O. 31W2-2GSC24-2

TM 11-5805-688-14-1

NAVELEX 0967-LP-545-3010

and stored with the multiplexer set or in a area

19-inch relay rack or equivalent. The ruggedized chassis

designated for storage of small items.

also allows the multiplexer set to be installed on a flat,

open surface that is capable of supporting 50 pounds per

2-7. RECEIVING DATA.

square foot. The installation data in table 2-1 should be

considered when selection of an installation location for

2-8. The multiplexer set is shipped with a set of plug-in

the multiplexer set is under consideration.

cards installed in the unit. The quantity and type of plug-

in cards will be determined by system application of the

Quantity

equipment.

The appropriate shipping literature will

identify the quantity and card types. Two separate

Item/Part No.

-019

-009

accessories are shipped with the multiplexer set: power

cable assembly P/N 61861700-009 (ac power cable) and

Backshell M83723-15S-14

connector kit assembly P/N 61867000009 or P/N

61867000-019. The contents of each connector kit

Plug MS3476E14-19S

assembly are listed in the following chart.

Connector plug

2-9. INSTALLATION HOUSING REQUIREMENTS.

(Bendix P/N

33449-1)

2-10. The multiplexer set is constructed so that it can be

mounted in a standard

Table 2-1. Installation Data

Item

Data

Chassis dimensions

Height

24.5 inches

Depth

19.0 inches

Width

17.0 inches

Chassis weight

140 pounds

Rack requirement

Standard 19-inch relay rack that is firmly mounted to a

floor to prevent tipping when multiplexer set is

mounted on slides and extended out of rack.

2-2