LEADING PARTICULARS.

T.O. 31W2-2GSC24-2

TM 11-5805-688-14-1

NAVELEX 0967-LP-545-3010

multiplexer set are mounted on plug-in printed circuit

1-10.

EQUIPMENT SUPPLIED.

cards that are accessible from the front of the equipment

1-11. The equipment supplied is listed in table 1-4 and

(figures 1-2 and 1-3). The power supply (figure 1-4) is a

shown in figure 1-1. The plug-in printed circuit cards

removable assembly that is mounted in the top of the

used in the multiplexer and the plug-in printed circuit

multiplexer set. All interconnecting cables associated

cards used in the demultiplexer are listed in separate

with the multiplexer set are connected to receptacles on

groups. Three cards (seq, OEG, and GC/ DM) are

the rear of the chassis.

common to the multiplexer and the demultiplexer, and

are therefore listed twice. The single display card is

1-5.

The printed circuit cards in the MULTIPLEXER

associated with the demultiplexer and the multiplexer.

(upper) row (figure 1-2) comprise the multiplexer; the

The quantity of each of the three channel cards in the

printed circuit cards in the DEMULTIPLEXER (bottom)

multiplexer is marked AR (as required) the quantity of

row comprise the demultiplexer. The one exception is

each of the four channel cards in the demultiplexer is

the display card in the upper row, which is common to

also marked AR. The quantity and types of channel

both the multiplexer and the demultiplexer. Within the

cards installed in a multiplexer set depend on system

multiplexer and the demultiplexer, the cards are further

application. The maximum number of multiplexer or

designated as common cards or channel cards. The

demultiplexer channel cards used in a given system

quantity and types of common cards are fixed, whereas

application is 15.

the quantity and types of channels cards are determined

by system application. The common cards generate the

1-12.

RELATED TECHNICAL MANUALS.

timing and control signals for the multiplexing and

demultiplexing functions. The channel cards provide the

1-13. Technical manuals related to the multiplexer set

input and output interface between the applied channel

are listed in table 1-5.

data and the common processing electronics.

Information on the quantity and types of printed circuit

1-14.

SPECIAL TOOLS.

cards associated with the multiplexer set is contained in

paragraph 1-11.

1-15. The special tools required for maintenance of the

multiplexer set are listed in table 1-6.

1-6.

LEADING PARTICULARS.

1-7.

Leading particulars of the multiplexer set are

1-16.

TEST EQUIPMENT.

listed in table 1-1.

1-17. The test equipment required for maintenance of

1-8.

CAPABILITIES AND LIMITATIONS.

the multiplexer set is listed in table 1-7.

1-9.

Physical and electrical capabilities and limitations

of the multiplexer set are listed in tables 1-2 and 1-3.

1-3