 |
|||
|
|
|||
|
Page Title:
TTY CONTROLLER PC CARD COMPONENT PERFORMANCE TEST |
|
||
| ||||||||||
|
|
 T.O. 31S5-4-308-l
TM 11-5805-663-14-13
NAVELEX 0967-464-0010
IC or group of IC`s. To accomplish the TTY
4. If LOAD lamp is not lighted after
Controller PC card component performance
the tape reel has made five or more revolu-
test perform the procedure in table 6-32.
tions, press REWIND switch: then, when
LOAD lamp lights, press ON LINE switch.
ATP test tape as follows:
e. Press reset and, then load switch.
Open Program Maintenance Panel.
a.
f. When tape motion stops, repeat step
e ten more times. (Tape motion must stop
b. On Processor Auto-Load PC card
after each load.)
A1A3A9, set the four red toggle switches,
designated from top to bottom as S1 through
g . Press run switch.
S4, as follows: S1 and S2 to up position,
S3 and S4 to down position.
h. The TTY shall print out:
Mount and thread ATP tape on Mag
CONTROL PANEL TP
Tape Unit 1 (A1Al).
PANEL TYPE =
d. On Mag Tape Unit, perform the
following:
i. Type in:
1.
Press LOAD switch.
2220(C/R)
2. When tape movement stops press
The TTY shall print out:
j
LOAD switch again.
PANEL ADDR =
3. When LOAD lamp is lighted, press
ON LINE switch.
k. Type in:
4. If LOAD lamp is not lighted after
FF80(C/R)
the tape reel has made five or more revolu-
t i o n s , press REWIND switch; then, when
1. The TTY shall print out:
LOAD lamp lights, press ON LINE switch.
TST 1
Press reset and load switch.
e.
PRESS RESET, ATTN
f. When tape motion stops, repeat step
m. Depress reset and then attn switch.
e eleven more times, to reach the twelfth
program. (Tape motion must come to a stop
n. The TTY shall print out:
after each load.)
TST 02
Press run switch.
g.
IF IDLE, PRESS RESET, ATTN
h. The TTY shall print out:
(ERROR NOT IDLE)
TTY TEST
Idle lam;, is lighted.
0.
p. Go to step 9 of table 6-31.
TTY LEV =
1.
Type in:
NENT PERFORMANCE TEST. The component
Performance test for the TTY Controller PC
card is used to isolate malfunctions to an
2 (C/R)
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals