 |
|||
|
|
|||
|
Page Title:
Figure 23. Glass negative carrier, opened , furnished with PH-406 |
|
||
| ||||||||||
|
|
 TM 11-405-10
Figure 23. Glass negative carrier, opened , furnished with PH-406
(c) Slide the end of the film roll through
holder and center the frame to be
the film channel until the frame to be
enlarged in the aperture.
enlarged is centered in the aperture.
(c) Replace the upper holder and fasten
The remaining rolled film should rest
the spring clips. (The plunger rod is
on the film holder.
used to move the film to the next
(2) ES-20(1) (fig. 25).
frame.)
d. Unloading Negative Carriers. To unload the
(a) Remove the spring clips and remove
the upper holder.
rapid-shift negative carrier, grasp the edges of the film
(b) Place the film roll in the carriage,
and remove the film roll. To unload any one of the other
emulsion side down, on the lower
negative carriers, open the negative carrier and remove
the negative.
AGO SR94A
30
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals