SECTION I INTRODUCTION - TM-11-3895-209-24P0005

TM 11-3895-209-24P

SECTION I

INTRODUCTION

1. Scope

Definition

Code

XD - A support item that is not stocked. When

This manual lists repair parts and special tools

required, item will be procured through

required for performance or organizational, direct

normal supply chanels.

support, and general support maintenance of RL-

NOTE

207/G and RL-207A/G.

Cannabalization or salvage may be used as

2. General

a source of supply for any items source

This Repair Parts and Special Tools List is divided

coded above except those coded XA, XD,

into the following sections:

and aircraft support items are restricted by

a. Section II. Repair Parts List. A list of repair

AR 700-42.

parts authorized for use in the performance of

(2) Maintenance code. Maintenance codes are

maintenance. The list also includes parts which

assigned to indicate the levels of maintenance

must be removed for replacement of the authorized

authorized to USE and REPAIR support items.

parts. Parts lists are composed of functional

The maintenance codes are entered in the third and

groups in ascending numerical sequence, with the

fourth positions of the Uniform SMR Code format

parts in each group listed in figure and item

as follows:

number sequence.

(a ) The maintenance code entered in the

b. Section III. Special Tools List. Not ap-

third position will indicate the lowest maintenance

plicable.

level authorized to remove, replace, and use the

c. Section IV. Natural Stock Number and Part

support item. The maintenance code entered in the

Number Index. A list, in ascending National item

third position will indicate one of the following

identification number (NIIN, last 9 digits)

levels of maintenance:

sequence, of all National stock numbers appearing

Code

Application/Explanation

in the listings, followed by a list, in alphameric

sequence, of all part numbers appearing in the

O- Support item is removed, replaced, used at the

listings. National stock number and part numbers

organizational level.

are cross-referenced to each illustration figure and

F- Support item is removed, replaced, used at the

item number appearance.

direct support level.

(b) The maintenance entered in the fourth

3. Explanation of Columns

position indicates whether the item is to be

The following provides an explanation of columns

repaired and identifies the lowest maintenance level

found in the tabular listings:

with the capability to perform complete repair (i.e.,

a. Illustration. This column is divided as

all authorized maintenance functions). This

follows:

position will contain one of the following main-

(1) Figure number. Indicates the figure

tenance codes:

number of the illustration in which the item is

code

Application/Explanation

shown.

(2) Item number. The number used to

F- The lowest maintenance level capable of

identify each item called out in the illustration.

complete repair of the support item is the

b. Source, Maintenance, and Recoverability

direct support level.

Codes (SMR).

Z- Nonreparable. No repair is authorized.

(1) Source code. Source codes are assigned to

(3) Recoverability code. Recoverability codes

support items to indicate the manner of acquiring

are assigned to support items to indicate the

support items for maintenance, repair, or overhaul

disposition action on unserviceable items. The

of end items. Source codes are entered in the first

recoverability code is entered in the fifth position

and second positions of the Uniform SMR Code

of the Uniform SMR Code format as follows:

format as follows:

Definition

Code

PA- Item procured and stocked for anticipated or

known usage.