REMOVAL AND REPLACEMENT OF ENGINE - Continued

TM 11-3895-209-14

5-13.

REMOVAL AND REPLACEMENT OF ENGINE - Continued

K Install but do not tighten the four nuts (5) and lock washers (6) on the studs of the engine

support.

L Install the timing belt and adjust the position of the engine to obtain correct alinement of the

timing pulleys and correct belt tension. Tighten the four nuts (5) on the engine support studs.

M Connect the exhaust system to the engine; connect the choke control, the throttle control, and

the ignition wiring and install the nipple in the fuel pump; connect the fuel line and lubricate the

engine as described in TM 5-2805-257-14.

5-30