REPLACEMENT - TM-11-3895-209-140080

TM 11-3895-209-14

5-13. REMOVAL AND REPLACEMENT OF ENGINE - Continued

REPLACEMENT

A Insert the Woodruff key (17) into the slot in the shaft of the

engine (18).

B Aline the keyway in the timing pulley (16) with the key in

the shaft, and install the pulley on the shaft.

C Tighten the two socket-head setscrews (15) in the timing

pulley.

D Remove the plug and the oil drain gasket from the engine

crankcase drain. Retain the gasket for use later in this

procedure.

E Lift the engine (18), and lower it into the engine support

(14).

F Install and tighten the 12 bolts (12) and lock washers (13)

that attach the support to the engine.

G Place the oil drain gasket (11) over the threaded end of

the oil drain extension (10), and install the extension in the

engine crankcase drain hole.

H Install the oil drain valve (9) in the oil drain extension (10)

and screw the street elbow (8) on the oil drain valve (9).

Turn the elbow toward the flywheel end of the engine.

I Screw the oil drain hose (7) into the street elbow (8).

J Install the engine and the attached support and oil drain

fittings in the frame of the RL-207(*)/G so that the four

studs on the support pass through the slotted holes in the

frame.

5-29