DISASSEMBLY AND REASSEMBLY OF CLUTCH AND BRAKE ASSEMBLY

TM 11-3895-209-14

5-11. DISASSEMBLY AND REASSEMBLY OF CLUTCH AND BRAKE ASSEMBLY - Continued

F Attach the collar (73) to the reel drive shaft (76) with the two socket-head bolts (72).

G On the upper unit, insert the latch spring (71) and ball bearing (70) into the locking plate side of

the collar. Install the locking plate (69) and socket-head bolt (68).

H Assemble the lock bolt assembly by attaching the locknut (66) and the E-ring (65) to the lock

bolt (67).

On the lower unit, insert the latch spring (71) and ball bearing (70) into the lock bolt side of the

collar. Install the lock bolt assembly (65), (66), and (67) and the socket-head bolt (64).

J Insert the lever arm (59) into the housing, and install the washer (58) and cotter pin (57).

5-16