OPERATOR MAINTENANCE INSTRUCTIONS
Section I. LUBRICATION INSTRUCTIONS
The range has a small number of moving parts. The lubrication required is described in para 3-2.
3-2. DETAILED LUBRICATION INSTRUCTIONS.
a. Cradle Rails-- Lubricate cradle rails in cabinet and on cabinet door with antiseize compound to prevent
the cooking pot cradle from sticking.
b. Hinges-- Lubricate hinges on cabinet door, lift handles, middle joint on door stays, racks for sliding shut-
ters on the cabinet door withgeneral purpose oil.
Section II. TROUBLESHOOTING
a. Table 3-1 lists the commonmalfunctions which you will find during the operation or maintenance of the
range outfit. You should perform the tests/inspections and corrective actions in the order listed.
b. This manual cannot list all malfunctions that may occurnor all tests or inspections and corrective
actions. If a malfunction is not listed or is not corrected by listed corrective actions, notify your supervisor.
Before you use this table, be sure you have performed all operating checks.
TABLE 3.1. OPERATOR TROUBLESHOOTING
TEST OR INSPECTION
1. FUEL SYSTEM FAILS TO MAINTAIN PRESSURE.
Step 1. Fuel filler cap loose.
Step 2. Fuel Drain plug is loose.
Step 3. Generator valve left open.
Step 4. Preheater valve left open.
Step 5. Generator connections not tight.
Step 6. Pressure gage not secure in tank.
Step 7. Air valve assembly not secure to tank.
Step 8. Safety valve does not reseat.
Refer to org maint.