LETTER AND NUMBER MARKINGS

TB 9-2510-242-40

12355846-102

Basecoat white, color 27925, per spec MIL-C-46168 or MIL-C-53039, 1.0 mils dry film thickness.

Application per MIL-STD-193.

12355846-200

Markings, black color 37030, per spec MIL-C-46168 or MIL-C-53039.

For camouflaged vehicles when black lettering would fall on black camouflaged areas, that portion of

the markings shall be brown 383, color 30051. Application per MIL-C-53072(ME).

SPECIAL FINISH

12355846-300

Non-slip surfaces:

Spread walkway compound grit per spec MIL-W-5044 while initial coat is still wet then additional

topcoat per 12355846-100. Application per MIL-C- 53072(ME).

12355846-301

Heat resistant paint (surfaces, attaining temperature of 400 degrees F).

Clean by solvent degreasing, grit or sand blasting. Topcoat, color green 383 or forest green per spec

MIL-P-14105, 1.5 - 2.5 Mils dry film thickness. Not to be overcoated with CARC. Application per spec

MIL-C-53072(ME).

PRODUCTION REPAIR

12355846400

Touch up and repair:

If the coatings are damaged to the substrate, then the area must be sanded, primed per spec MIL-P-

53022, MIL-P-53030 or MIL-P-53084, 1.0 - 1.5 Mils dry film thickness and topcoated per 12355846-

100. Application per MIL-C- 53072(ME).

Damage not penetrating to the substrate may be recoated with final finish per 12355846-100 after

sanding. Application per MIL-C-53072(ME)

12355486401

Surfaces coated with primer or alkyd olive drab or forest green paint:

Clean per applicable method I thru VI per spec TT-C490. Apply epoxy primer per spec MIL-P-53022,

MIL-P-53030 or MIL-P-53084, 1.0 - 1.5 Mils dry film thickness. Topcoat per 12355846-100.

Application per MIL-C-53072(ME).

D-5