Remove harness 11673835 connector from the accessory relay

TB 9-2350-257-20-1

STEP 10

Place MASTER BATTERY and FUEL PUMP switches to

the OFF position. Disconnect voltage regulator Install

"T" harness as In step 1.

Using "T" harness check accessory relay resistance from

"T" harness socket F to vehicle GROUND Accessory

relay coil resistance shall be 100-200 ohms.

a. If resistance is not indicated, proceed to step 11.

b. If accessory relay coil resistance exists, proceed

STEP 11

Remove harness

11673835

connector

from

the

accessory relay.

Check accessory relay resistance between connector

from pin F and pin D Resistance shall be 100-200 ohms.

a. If resistance is as Indicated, repair harness

11673835

b. If resistance is not as indicated, replace

assessory relay.