Figure 3-13. Air outlet hose replacement (V-band clamp).

TB 9-2300-378-14

(o) Close top grille doors (TM-10).

(3) Outlet Hose (V-Band Clamp) (Fig. 3-13).

Figure 3-13. Air outlet hose replacement (V-band clamp).

(a) Loosen hose clamps (view A).

(b) Remove clamps from hose.

(c) Remove hose from elbows.

(d) Inspect hose packing. If it is cracked, loose or dry, replace as follows:

1. Remove packing and clean away adhesive.

2. Apply adhesive, MIL-SPEC MMM-A-1617, Type II - NSN 8040-00-152-

0063 (2.5 oz. can) or NSN 8040-00-152-0067 (6 oz. can) - in groove of

hose assembly flange.

3. Install new packing - NSN 5330-00-729-5049 (part no. 10870861).

(e) Check metal flange ends for bonding to hose. If bonding is loose, replace

hose assembly.

Check V-band clamps for split bands (view B) bent or stripped T-bolts,

(f)

a n d damaged nuts.

R e p l a c e defective clamp NSN 5340-00-678-6178

(part no. 8711310). Turbocharger end, NSN 4730-01-132-9086, PN 01-

1000 outlet end.

(g) Check

flat band clamp for proper installation. If not installed properly,

loosen

and apply a light coat of lubricant (silicone grease MIL-G-46886)

t o the

area of hose where clamp will be installed, install clamp and

tighten

securely.

3-37