 |
|||
|
|
|||
|
Page Title:
Figure 25. Reinforcing Plate Fabrication Details |
|
||
| ||||||||||
|
|
 TB 9-2300-247-40
Figure 25. Reinforcing Plate Fabrication Details
NOTE
If forming equipment is not available
for fabricating reinforcements under
this task, the sketches for fabrication
shown in Figure 27 are recommended
for use..
m.
Using
forming
equipment,
fabricate
reinforcements as shown in Figure 26
and/or Figure 27, as applicable.
n.
After bolts and rivets have been removed,
fit the fabricated reinforcement inside the
side rail, tightly butted up to the framing
crossmember as shown in Figure 28.
o.
Using grinding tool, slightly grind the
reinforcing member as necessary to
provide an accurate fit.
p.
Locate and drill new center-to-center holes
for connection of the framing and
reinforcing members, size holes no larger
than the existing holes. Where new holes
cannot be drilled with reinforcing plate in
position, locate holes, center-to-center,
remove reinforcing plate, drill new holes
and reinstall plate.
Figure 26. Reinforcing Channel Fabrication Details
24
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals