 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 SB 740-91-01
Step
Setting and Instructions
Normal Indication
A
(con't)
(32)
c)
KEY
DISPLAY
FFE LOT/O
LOT
FFE RDS
RDS
FFE FZ
FZ
READY
READY
SHOT/RD
SHOT/RC
RING
RING
CYCLE
CYCLE
NOTE
The indication for step 33 will show
"ERROR D" if the NORMAL/BITE switch
is in NORMAL for this test.
(33) Press and hold SELF TEST key.
a)
Alarm on.
SCA displays "PHASE D"
TEST indicator on.
(34) Release SELF TEST key.
a)
Alarm off.
SCA displays "TEST OK".
(35) Allow GA displays to extinguish
Press and release GA1 RECALL button.
a)
GA1 Display will reappear.
GA1 display will extinguish
after 15 secs + 2 secs.
(Time from release of
recall button).
Repeat for GAs.
b)
GA2 display wil'i re-appear
GA2 display will extinguish
after 15 secs + 2 secs.
Press RECALL button on GA1. Vary
Display control through range.
Repeat for GA2.
d)
As is c above.
(36) Press and hold SELF TEST key.
a)
Alarm on.
SCA displays "PHASE E" Test.
Release SELF TEST key.
b)
Alarm off.
After several seconds SCA
displays "TEST OK".
(37) Press and hold SELF TEST key.
a)
Alarm on
SCA displays "PHASE F"
Release SELF TEST key.
b)
Alarm off.
SCA displays "TEST OK"
(38) Press and release SELF TEST key.
a) SCA displays GUNO1EOM
15 secs + 2 secs before
extinguishing.
Press and release CYCLE key.
b)
SCA displays GUNO1EOM.
Change 1 B-130.24
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals