Installation - TM-5-4930-233-140273

TM 10-4930-233-14

TM 4930-14/1

ENCLOSURE AND SKID ASSEMBLY

5-4. PANELS - REPLACE - (Cont.)

b. Installation

NOTE

Step 3 applies to all panels. For other steps, proceed as needed.

(1) For right rear panel, position storage pocket (8) and install using nine rivets (7).

(2) For front and rear side panels, coat back side of handle (6) with epoxy- polymide primer and install using four

rivets (5).

(3) Position panel (4) and install using rivets (3) as necessary. Seal panel along all outside edges with synthetic

rubber caulking compound.

(4) For top panel, install eight hooks (2) using rivets (1) as necessary.

(5) For front and rear side panels, drill out four rivets (5) and remove handle (6).

(6) For rear right side panel, drill out nine rivets (7) and remove storage pocket (8).

Change 1

5-12.2